| Angle 1
|
<angle value> between 5° and 85°
- Sets angle for
the first radius piece.
|
| Angle 2
|
<angle value> between 5° and 85°
- Sets angle for
the second radius piece.
|
| Angle 3
|
<angle value> between 5° and 85°
- Sets angle for
the third radius piece.
|
| Angle 4
|
<angle value> between 5° and 85°
- Sets angle for
the fourth radius piece.
|
| Connection | Length
|
<numeric value>
- Sets length of
female connection for both ends.
|
| Connection | End Type
|
fl
-<numeric value>
- Sets and sizes
end with a flange connection.
m
-<numeric value>
- Sets and sizes
end with a male connection.
fe
-<numeric value>
- Sets and sizes
end with a female connection.
Separate End Type entries for each End Spec with a semi
colon.
Example: fl-2;fe-.13 creates a flange at End1
with size 2, and a female connection at End2 with an overall reduction of
component's dimensions of .13
|
| Connection 1 | Length (L1)
|
Positive <numeric value>
- Sets straight
length at End1.
|
| Connection 2 | Length (L2)
|
Positive <numeric value>
- Sets straight
length between first and second radius pieces.
|
| Connection 3 | Length (L3)
|
Positive <numeric value>
- Sets straight
length between second and third radius pieces.
|
| Connection 4 | Length (L4)
|
Positive <numeric value>
- Sets straight
length between third and fourth radius pieces.
|
| Connection 5 | Length (L5)
|
Positive <numeric value>
- Sets straight
length for End2 connection.
|
| Offset 1
|
<numeric value>
- Sets center line
offset distance from End1 to maximum crossover location.
|
| Offset 2
|
<numeric value>
- Sets center line
offset distance from End2 to maximum crossover location.
|
| Radius 1 (R1)
|
Positive <numeric value>
|
| Radius 2 (R2)
|
Positive <numeric value>
|
| Radius 3 (R3)
|
Positive <numeric value>
|
| Radius 4 (R4)
|
Positive <numeric value>
|
| Total Length (L)
|
Positive <numeric value>
- Displays combined
length of radius pieces. Set by application.
|
| Transition1 Length
|
Positive <numeric value>
- Sets length of
transition from female connection to straight portion on ends.
|
